Sherwood SD-860 - Manual (Page 26)

26
BOOKMARK PLAYBACK
During playback, press the MARKER button.
1
Press the CURSOR / buttons to select the desired bookmark number.
3
• Then the bookmark menu is displayed on the TV screen.
• When the MARKER button is pressed again, the
bookmark menu disappears.
• Each time the CURSOR or button is pressed, the
mark mode or the recall mode is selected.
• Then the bookmark is stored in the memory.
• Repeat the above steps 1~4 until the desired scenes/
points are marked.
• When the ENTER button is pressed at a previously used
bookmark number, the new scene/point will be marked
with that bookmark.
• Playback resumes from the scene/point corresponding to
the selected bookmark.
Notes:
• Opening the disc tray or turning the power off clears all
stored bookmarks.
• The bookmark function may not work with some discs.
At the desired scene/point, press the ENTER button.
4
Press the CURSOR / buttons to select the mark mode.
2
• The bookmark function allows you to mark the desired scene/point that you can go to quickly.
Up to 14 bookmarks can be stored in the memory.
Storing a bookmark in the memory
To select the recall mode, perform the above steps 1 and 2.
1
Press the CURSOR / buttons to select the bookmark number that you want to recall and press the ENTER
button.
2
Recalling a bookmarked scene/point
RC
RC
RC
RC RC
RC
MARK GOTO TOTAL
01 01 00/14
The bookmark number to be stored
Mark mode
Recall mode
The stored bookmark number
Total number of the stored bookmark