Sony TA-VE800G - Manual (Page 12)

12 GB
Preparing and Using the Remote
Inserting Batteries Into the
Remote
1
Open the cover on the bottom of the remote.
2
Insert two size -AA (R6) batteries with correct
polarity (+/–).
3
Close the cover.
To avoid damage caused by battery leakage and
corrosion
Remove the batteries when the commander will not be
used for a long time.
Battery life
• Normal operation can be expected about three
months using Sony SUM-3 (NS), and a half year
using Sony AM-3 (NW) alkaline batteries. Since the
remote consumes power whenever you pick it up
and an on-screen display appears, the service life of
the batteries may be less than three months,
depending on how much you handle the remote.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a
malfunction.
( ) 0 p P = +
FUNCTION
+
–
VOL
ALL
OFF
USER SUB
S
O
U
N
D
PUSH
ENTER
M m
Pointer
Blank
area
Direction
control
button
How to Use the Remote
The supplied remote lets you perform almost all of the
amplifier operations. Operation is simple, press the
direction control button on the remote once to recall the
on-screen display, then press the corner of the direction
control pad representing the direction you want to
move the pointer (hand shaped icon) on the on-screen
display. Position the pointer so that the finger tip is
positioned on one of the on-screen items, then press
and quickly release the centre of the direction control
button to “click” the item.
To turn on the amplifier
Press the direction control button on the remote once or
twice to turn on the unit.