Sony TA-VE800G - Manual (Page 7)

7 GB
Getting Started
Unpacking
Check that you received the following items with the
amplifier:
• Remote commander RM-VR1 (remote) (1)
• Size AA (R6) batteries (2)
• IR repeater (1)
• Video cable (1)
• Getting Started and Basic Operation Guide (1)
Hookup Overview
The amplifier allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the amplifier on the pages specified. To
learn the locations and names of each jack, see “Rear
Panel Descriptions” on page 41.
Getting Started
Front
speaker
(L)
Front
speaker
(R)
Speaker
System
Hookups (9)
Rear
speaker
(L)
Rear
speaker
(R)
IR Repeater
Hookups (8)
Satellite decoder
VCR
LD player
Monitor
TV/VCR Hookups (10)
CD player
Tape deck
DAT/MD deck
Turntable
Audio Component
Hookups (8)
Centre
speaker
Active
woofer
Video camera/
Video game
TV/VCR
Hookups (10)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the mains leads until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the colour-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.