Enabling the telephone again, Selecting the language for user prompts (displays), Selecting a language – Siemens Hicom 300 E User Manual
Page 47
Telephone settings
47
47
47
47
Step by Step
Enabling the telephone again:
Press the key. The lamp lights up.
?@
Enter the service code.
or
Select and confirm.
Select and confirm.
and
E
Enter the PIN (cod e number).
Input is followed by the display:
"Executed".
Selecting the language for user
prompts (displays)
Your HiPath 4000 or Hicom 300 E/H system can be con-
figured for up to five d ifferent languages. The first lan-
guage programmed is the default. If your telephone has
a language key, you can program a different language.
The period of time for which the other language re-
mains active dep end s on the language option that has
been configured. There are two possibilities:
•
Static language option
The language remains programmed until you
select a different language.
•
Temporary language option
The language remains p rogrammed until the end of
the next call, after which the system reverts to the
default language.
Selecting a language:
Press the key. The language selected appears on the
display for five seconds and is then set. Keep pressing
the key if you wish to select a different language.
Ser vice Menu
P IN / COS?
Chan ge COS?
Language