Taking calls for colleagues in a team, Telephone in the idle state, In the course of a call – Siemens Hicom 300 E User Manual
Page 81: Ending the waiting call – back to the first, Picking up a specific team call
Making multiline and team calls
81
81
81
81
Step by Step
Taking calls for colleagues in a team
If a memb er of a team does not answer a call within 15
seconds (depending on the system), the other mem-
bers of the team hear an aler ting tone.
Te lephone in the idle state:
The telephone rings. The display shows: "Call for...".
C
and
Lift the handset and press the flashing key. You have
now taken over the call.
or
Press the flashing key only.
You are in the speakerphone mode.
In the course of a call:
Press the flashing key.
The first party waits while you are connected to the
waiting p arty (
Ending the waiting call – back to the first:
Press the key.
Picking up a specific team call
You hear another telephone ring and you know its sta-
tion number or a colleague asks you (verbally) to pick up
a call for a specific telephone.
If you do not know the numb er, you can have it dis-
played (
C
Lift the handset.
Select and confirm.
E
Enter the station number of the telephone for which
you wish to (or have been requested to) pick up the call.
In this way you pick up the call.
Wait ing call
Wait ing call
Wait ing call
Disconnect
Direct call pickup?