Siemens Hicom 300 E - Manual (Page 66)

Step by Step
Using a different telephone in the same way as your own
66 66 66 66
W ith the display "Enter station no." or "Enter ID", you are
requested to enter the PIN.
Entering the PIN for your own HiPath 40 00 or Hicom
30 0 E/H system:
E
Enter internal PIN.
or Entering the PIN for another HiPath 40 00 or Hicom
30 0 E/H system area within the integrated network:
E
Enter the 2-digit node code for your own HiPath 4000 or
Hicom 300 E/H system (ask with System Supp ort).
EG
Enter your own number and press the pound key.
EG
Enter the network-wide PIN and press the pound key.
Dialing after (successful) identification:
You hear a dial tone. The following appears on the dis-
p lay: "Please dial".
Press the key. The lamp goes out.
or
E
Enter a number immediately.
Call forwarding - follow me after successful
identification
Select and confirm.
Confirm. Call forward ing has b een activated.
Ente r th e code !
S peaker
Variable call forw.?
Save?