Appendix d system specifi cations – SUPER MICRO Computer 6025B-UR User Manual

Page 119

Advertising
background image

D-1

Appendix D: System Specifi cations

Appendix D

System Specifi cations

Processors

Single or dual Intel® Xeon 5300/5100/5000 Sequence processors at a front

side (system) bus speed of 1333/1066/667 MHz.

Note: Please refer to our web site for a complete listing of supported processors.

Chipset

Intel 5000P/ESB2 chipset

BIOS

8 Mb Phoenix® Flash ROM

Memory Capacity

Eight 240-pin DIMM sockets supporting up to 32 GB of ECC FBD DDR2-667/533

SDRAM.

See the memory section in Chapter 5 for details.

SATA Controller

Intel ESB2 on-chip controller for six-port Serial ATA (RAID 0, 1 5 and 10

supported)

SATA Drive Bays

Eight (8) hot-swap drive bays to house eight (8) standard SATA drives

Peripheral Drive Bays

One (1) slim DVD-ROM drive

Expansion Slots

Left side: UIO card and three PCI-Express x8 cards (with RSC-R2UU-UA3E8

riser

card.)

Right side: one PCI-X 133 MHz card and two PCI-Express x4 cards (with RSC-

R2UU-X2E4R riser card). (Left and right refer to the side when viewed from

the

front

of

the

chassis.)

Advertising