SUPER MICRO Computer 6025B-UR - Manual (Page 3)

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6025B-UR.
Installation and maintainance should be performed by experienced technicians
only.
The SuperServer 6025B-UR is a high-end server based on the SC825TQ-R700U
2U rackmount chassis and the X7DBU, a dual processor serverboard that supports
Intel ® Xeon ® 5300/5100/5000 series processors at a Front Side (System) Bus speed
of 1333/1066/667 MHz and up to 32 GB of ECC FBD DDR2-667/533 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X7DBU serverboard and the
SC825TQ-R700U chassis, which comprise the SuperServer 6025B-UR.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6025B-UR
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6025B-UR.