Resetting sound fields to the initial settings – Sony STR-DB2000 User Manual
Page 39
Ad
v
a
n
ced
Adjus
tmen
ts a
nd Se
ttings
39
GB
x
CENTER XXX.X dB
(Center speaker level)
x
SURR L XXX.X dB
(Surround speaker (L) level)
x
SURR R XXX.X dB
(Surround speaker (R) level)
x
SB XXX.X dB
(Surround back speaker level)
*
x
SB LEFT XXX.X dB
(Surround back (L) level)
**
x
SB RIGHT XXX.X dB
(Surround back (R) level)
**
x
SW XXX.X dB
(Sub woofer level)
Initial setting: 0 dB
You can adjust from –20 dB to +10 dB in 0.5 dB steps.
x
MULTI 1 SW XXX dB
(Multi channel 1 sub woofer level)
x
MULTI 2 SW XXX dB
(Multi channel 2 sub woofer level)
Initial setting: 0 dB
Lets you increase the level of the MULTI CHANNEL
INPUT 1/MULTI CHANNEL INPUT 2 sub woofer
channel by +10 dB. This adjustment may be necessary
when connecting a DVD player to the MULTI
CHANNEL INPUT 1/MULTI CHANNEL INPUT 2
jacks. The sub woofer level from DVD players is 10 dB
lower than Super Audio CD players.
x
EFFECT LEVEL XXX%
(Effect level)
Initial setting: 100%
Higher settings apply more surround effect. You can
adjust from 20 % to 120 % in 10 % steps.
* Only when the surround back speaker is set to
“SINGLE” or “YES” in the SP. SET UP menu
(page 21).
**Only when the surround back speaker is set to
“DUAL” in the SP. SET UP menu (STR-DA2000ES
only) (page 21).
Note
When one of the following sound fields are selected,
no sound is output from the sub woofer if all the
speakers are set to “LARGE” in the SP. SET UP menu.
However, the sound will be output from the sub woofer
if the digital input signal contains LFE (Low
Frequency Effect) signals, or if the front or surround
speakers are set to “SMALL”.
– HALL
– JAZZ CLUB
– LIVE CONCERT
For advanced LEVEL menu
adjustments
Use the CUSTOMIZE menu and set “MENU
EXP.” to “ON” to enable advanced adjustments.
For details on “MENU EXP.”, see page 40. For
details on how to set the items, see page 43.
Resetting sound fields to the
initial settings
1
Press
?/1
to turn off the power.
2
While holding down MUSIC, press
?/1
.
“S.F. Initialize” appears in the display and
all sound fields are reset to the initial
setting.