Sony STR-DB2000 - Manual (Page 42)

42 GB
All SP. SET UP menu parameters
a)
Adjustable only when “EASY SET UP” is set to
“NO”.
b)
Default unit is “feet” for STR-DA2000ES. Default
unit is “meter” for STR-DB2000.
c)
Adjustable only when “MENU EXP.” is set to
“ON”.
x D.UNIT (Distance unit)
Lets you select the unit of measure for setting
distances.
• feet (default for STR-DA2000ES)
The distance is displayed in feet.
• meter (default for STR-DB2000)
The distance is displayed in meters.
x POSI
(Surround speaker position)
*
Lets you specify the location of your surround speakers
for proper implementation of the surround effects in
the Cinema Studio EX modes (page 33).
• SIDE/LOW
Select if the location of your surround speakers
corresponds to section A and C.
• SIDE/HIGH
Select if the location of your surround speakers
corresponds to section A and D.
• BEHD/LOW
Select if the location of your surround speakers
corresponds to section B and C.
• BEHD/HIGH
Select if the location of your surround speakers
corresponds to section B and D.
* This setup item is not available when the surround
speaker parameter is set to “NO” (page 21).
Tip
Surround speaker position is designed specifically for
implementation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so
critical. Those sound fields were designed under the
premise that the surround speakers would be located
behind the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects becomes unclear unless set to “SIDE”.
Nevertheless, each listening environment has many
variables, like wall reflections, and you may obtain
better results using “BEHD” if your speakers are
located high above the listening position, even if they
are to the immediate left and right.
EASY SET UP
SP PATTERN
SUB WOOFER
a)
FRONT SP
a)
CTR SP
a)
SURR SP
a)
SB SP
a)
FRONT X.X meter (feet)
b)
CTR X.X meter (feet)
b)
SURR X.X meter (feet)
b)
SB X.X meter (feet)
b)
SW X.X meter (feet)
b)
D.UNIT
c)
POSI
c)
CROSS > XXX Hz
c)
B B
A A
100˚
120˚
60
30
C
D
C
D