Sony PCWA-C150S - Manual (Page 42)

42
7
Select the channel number from the “Channel Number”
drop-down list.
Note
When creating a new network, you can select any channel number.
z Tip
When connecting to an existing network, the channel number is selected
automatically.
8
Click “Next”.
The Set Security window shown below appears.
9
When creating a new network or when connecting to an
existing network where Data Security (also called WEP or
Encryption) is enabled, use the following settings.
Note
The Data Security function serves to prevent unauthorized access to the network. It
is strongly recommended that you enable Data Security.
1. Select the “Enable Data Security” check box.
2. Select the input method for the key (the key is a password for
connecting to a network with Data Security enabled): “Use
Alphanumeric Characters (0 - 9, a - z, A - Z)” or “Use
Hexadecimal (0 - 9, a - f, A - F)”. Symbols are also available
when you select “Alphanumeric Characters (0-9, a-z, A-Z)”.