Sony CDP-D11 - Manual (Page 11)

11
З¢ЗОЗ¢ЗОЗ»зƒк∂ ÇÃǵǩÇΩ VARIOUS OPERATION
To return to the normal play from the
programmed play
In stop mode, press CONTINUE in the remote control.
The indicator of the PLAYMODE position in the display win-
dow turns to “C” from “P”.
z
The same track can be programmed repeatedly.
Press the track number as much as times you want
to repeat.
z
The program is retained after all programmed
tracks are played.
By pressing the
fl button, the same program is
played again.
Notes
• The program is canceled when the disc is ejected by
pressing the § EJECT button.
• After turning off the power or after disconnecting the AC
cord, tracks after the 25th in the program are canceled.
• Up to 888 minutes can be programmed. If you attempt
to program more, “Time Full” is displayed.
• The program is canceled when the PLAY MODE is
changed.
z
During program operation, you can check the total
playing time of the program. (Program edit)
In step 2, press the
= or + button repeatedly
until the track you want to program is displayed. The
selected track number and the total playing time of
when the track is added are displayed. By pressing the
PROGRAM button, the track is programmed.
To check the programmed contents
Before playback starts or during playback, press
the CHECK button.
Each time it is pressed before playback starts, the
track number and its playing time are displayed in the
programmed order.
z
Programmed play can be set with the MENU Mode
in the main unit.
1 Press the MENU/EXIT button to display “MENU
Mode”.
2 Turn the AMS control to display “PLAY Mode”,
then press the AMS control.
3 Turn the AMS control to display “PROGRAM”,
then press the AMS control.
4 Press the MENU/EXIT button.
5 Turn the AMS control to display the track number to
be programmed, then press the AMS control. Repeat
this step in the order you want to program.
To check the programmed contents in the main unit
By turning the AMS control in pause mode, track
numbers can be checked in the programmed order.
Contents
Cancel a track in the
middle
Cancel the last track
Add a track to the end
Cancel the whole
program
Operation
1 Press CHECK repeatedly until the
track to be canceled is displayed.
2 Press CLEAR.
Press CLEAR in stop mode.
Each time it is pressed, the last track
is canceled.
Press the number button of the track
to be added.
Press CONTINUE.
To change the programmed tracks
Before playback starts, the program can be changed.
During playback, information about the track during
play and the later tracks are displayed.
P t 3
04/05S
28 1 s m
54 5t03 s m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
Playing time of the
checking track
Track number of the current
playing track
Elapsed playing time
of the current track
Program number
Total number of
programmed tracks
Track number of the
checking track
Total number of
programmed tracks
P t 12
02/05Step
21 3 s m
32 15 s m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
Track number of the
checking track
Playing time of the
checking track
Total playing time of the
programmed tracks Program number