Sony CDP-D11 - Manual (Page 13)

13
З¢ЗОЗ¢ЗОЗ»зƒк∂ ÇÃǵǩÇΩ VARIOUS OPERATION
0 )
0 )
+ =
p P ·
LOCATE
LOCATE
“P” is displayed.
·
A•CUE
To pause after playback
of each track
(Auto pause)
Playback of each track is paused automatically at the
beginning of the next track. The function is effective
for recording only a track or recording several tracks
which are not continual.
0 )
0 )
+ =
p P ·
A•CUE
A•PAUSE
fl
P
To cancel Auto pause
Press the A•CUE button repeatedly until “A•CUE/PAUSE
OFF” is displayed.
(Press the A•CUE/A•PAUSE button on the remote control.)
Notes
•
When a marked point is located, play may be paused at
the point several frames after the marked one due to
recording condition of the disc. In this case, the time of
the located point may be 1 second after the marked one,
if the time of the marked point is very near to the next
second.
•
During the programmed play, if the LOCATE button is
pressed though the track in which the point is marked is
not included to the playing program, “Not PRO-
GRAM” is displayed.
C
Auto PAUSE ON
P
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
To locate the marked point (Locate)
Press the LOCATE button. Play is paused at the
marked point, and play can be starts from there.
Press the A•CUE button repeatedly
until “Auto PAUSE ON” is displayed.
(Press the A•CUE/A•PAUSE button on the
remote control.)