Sony CDP-D11 - Manual (Page 14)

VARIOUS OPERATION
14
To start the sound
immediately
(Auto cue)
Play can starts from the point of sounds by skipping
the portion with no sounds. This function is effective
when you add the sounds to video editing.
1
Press the A•CUE button repeatedly
until “Auto CUE ON” is displayed.
(Press the A•CUE/A•PAUSE button on the
remote control.)
2
Turn the AMS control to display the
track number to be selected.
(Press the = or + button on the remote
control.)
3
By pressing the fl button, the point
from which the sound starts is
searched and play is paused at it.
(Press the · button on the remote control.)
4
By pressing the fl button, playback
starts immediately.
(Press the ∏ button on the remote control.)
To cancel Auto cue
Press the A•CUE button repeatedly until “A•CUE/PAUSE
OFF” is displayed.
(Press the A•CUE/A•PAUSE button on the remote control.)
Number
buttons
MENU/EXIT
·
=/+
0 )
0 )
+ =
p P ·
A•CUE
fl
≠ AMS ±
A•CUE
A•PAUSE
P
“C” is displayed.
z
When the track is selected by the number button on
the remote control
When the track is selected by the number button on the
remote control at “Auto CUE ON”, play is paused after
the point from which the sound starts is searched out
without pressing the
· button.
z
The sound level (threshold level) at the point to be
auto cued can be selected.
This unit is designed so as to search for a point with
sounds more than –60dB and to pause.
The level of the point where play is paused is selected
from among 5 levels (–72dB, –66dB, –60dB, –54dB,
–48dB) by setting the MENU Mode.
1 In stop mode, press the MENU/EXIT button to
display “MENU Mode”.
2 Turn the AMS control to display “Auto CUE”, then
press the AMS control.
3 Turn the AMS control to display the desired level,
then press the AMS control.
4 Press the MENU/EXIT button.
P P P
P P P
Track
Portion with sounds
Auto pause
Auto cue
Auto pause and Auto cue
1st track
C
Auto CUE ON
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
C
2nd track 3rd track