SUUNTO X3HR - Manual (Page 25)

23
Units
This setting is used for defining the altitude, air pressure and temperature formats.
To change Units:
1. In the function menu, scroll to Units with the arrow buttons
and short press SET. The altitude format on the middle row
(left side) is activated.
2. Change the altitude unit (m/ft) with the arrow buttons and
short press SET. The air pressure format on the top row is
activated.
3. Change the air pressure unit (hPa/inHg) with the arrow
buttons and short press SET. The temperature format on
middle row (right side) is activated.
4. Change the temperature unit (C/F) with the arrow buttons and short press SET.
The Units text on the bottom row is activated. Now you can either
5. Long press SET to switch back to the main display.
6. or scroll to the next selection with the arrows.