Sharp Aquos LC 45D40U - Manual (Page 32)

31
Now Initializing
Useful adjustment settings
Input Select
Selecting input source
Use this menu to select the input source.
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a/b.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Press a/b to select the signal type you
want to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any color.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 or 2 terminals.
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
NOTE
• If you set INPUT 1 and INPUT 2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment for
the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to “Auto”
when other equipment is connected will result in the
following connection priority.
1
2
1
2
4
3
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press c/d to select “Yes”, and then press
ENTER.
• “Now, TV will restart automatically. OK?”
displays on the screen.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Reset”, and then press
ENTER.
• “Return to the factory preset values” displays on
the screen.
1
2
4
3
Press c/d to select “Yes”, and then press
ENTER.
• “Now Initializing” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will
have returned to its original settings.
5
NOTE
• The AV MODE will be set to “STANDARD”.
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
Press MENU to exit.
6
Press MENU to exit.
5
D40U_en_g.indd 31 2006/01/23 11:32:25