Sharp Aquos LC 45D40U - Manual (Page 7)


Supplied accessories
NOTE
• Always use the AC cord supplied with the TV.
Make sure the following accessories are provided with the product.
Remote control unit (g1)
Page 8 Page 8 Page 7
Page 7 Page 7
“AAA” size battery (g2) AC cord (g1)
Cable Clamp (g1) Cable tie (g1) Operation manual (g1) Stand unit (g1)
Page 6
1. Confirm the 8 screws supplied with the TV.
NOTE
• To detach the stand, perform the steps in reverse order.
4. Insert and tighten the 4 long screws into the 4 holes on
the rear of the TV.
2. Attach the two parts of the stand unit to each other using
the 4 short screws and the hex key (supplied with the
product) as shown.
3. Insert the stand into the opening on the bottom of the
TV.
Attaching the stand
• Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
Short screws (m4)
(used in step 2)
Long screws (m4)
(used in step 4)
QUICK REFERENCE
Hex key
Hex key
Short screw
Soft cushion
Long screw
D40U_en_a.indd 6 2006/01/23 11:22:15