Sharp Aquos LC 45D40U - Manual (Page 8)


QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
It's best to use 2 people to remove the AQUOS television for stability.
1. Use the cardboard holders on either side of the AQUOS television to remove it from the box.
2. Remove the cardboard; however, keep the wrapping on the AQUOS television to protect it while
moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat
source or use near water. The AQUOS television is designed for AC use only and should be used
with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Attach your antenna to the back of the TV.
(See page 13.)
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3. Place the Ferrite core in the space indicated in the below
figure and bundle the cords properly with a cable clamp
and cable tie.
4. How to turn on the AQUOS television for the first time.
A) Press
POWER on AQUOS television.
POWER
POWER indicator
2. Connect the AC plug for the AQUOS television into the
AC outlet.
B) POWER indicator on the front of the AQUOS television
lights GREEN.
NOTE
• Speaker cannot be detached from the TV.
• TV angle cannot be adjusted.
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.
D40U_en_a.indd 7 2006/01/23 11:22:18