Seiko Instruments DPU-S445 - Manual (Page 17)

- 13 -
2 EACH PART OF PRINTER
③
⑬
⑪
④
⑭
①
⑧
⑨
⑦
②
⑩
⑥
⑤
⑫
⑮
⑯
(1) POWER switch
The POWER switch turns the printer ON
or OFF. To turn the printer on, hold down
the POWER switch until the POWER lamp
lights. To turn the printer off, hold down
the POWER switch until the POWER lamp
goes off.
(2) FEED switch
In the Mark Roll Paper mode, the printer
feeds the paper until paper mark detection
by pressing this switch once. In the other
condition, the printer feeds a small amount
of thermal paper by pressing this switch
once and the switch is held down, the
thermal paper is fed continuously.
(3) POWER lamp
The POWER lamp lights when the printer
turns on. See the Lamp Display on the
next page for details.
(4) ERROR lamp
The ERROR lamp lights when something is
wrong with the printer. See the Lamp
Display on the next page for details.
(5) Infrared transmitter/receiver
The infrared transmitter/receiver is used to
communicate with the host device having
the IrDA which is in accordance with the