Seiko Instruments DPU-S445 - Manual (Page 33)

- 29 -
7 CONNECTING TO THE HOST DEVICE
This printer supports serial and USB communication through an interface cable and
infrared communication based on IrDA (Ver1.2). Moreover, the Bluetoorh supported
model supports Bluetooth (Ver.2.0+EDR)-compliant wireless communication.
The printer function setting differs depending upon a communication method to be used.
See Section 6 FUNCTION SETTINGS for details.
An interface cable is required to perform serial or USB communication. See Section 11
SPECIFICATIONS for details of interface specifications.
The communication speed might be reduced depending on data processing by
software as well as print type and size.
NOTE: Unsupported Bluetooth printer does not support wireless communication.
HINT
• Connecting the printer and the host device using the USB interface cable
makes fix to communication method as USB communication mode
regardless of selection of communication mode by the function setting.
DO NOT connect the USB interface cable If other communication modes
are required.