SSI America BINARY SOLVENT DELIVERY MODULE 90-2581 REV B - Manual (Page 9)

3-2
SELF-FLUSH
Connect wash solution inlet and
outlet tubing
(opaque) to the flush housing as
shown.
Make sure ferrule is in the correct
position.
Screw syringe on luer fitting.
Insert wash outlet tubing end
into clear adapter.
PUMP
Connect pump inlet tubing as
shown.
Make sure ferrule is in the
correct
position.
Ensure inlet line filter is
submersed into solvent.
Attach syringe to Prime-Purge
valve.
Open Prime-Purge valve by
turning knob counterclockwise
two turns.
Draw syringe back to prime.
Draw on syringe until no
bubbles are seen