Reject call, When number is busy, Auto redial – Siemens CL50 User Manual

Page 13: Redial previous numbers, Making a phone call

Advertising
background image

12

13.1.03

Dinghy-ger.fm

DINGHY, Int English, A31008-H6900-A4-3-7619

Making a phone call

Reject call

§Reject§

Press or

S

press briefly.

When number is busy

If the number called is busy or it can-

not be reached because of network

problems, the following options are

available (depending on the service

provider):

Auto redial ?

§Yes§

Press. The number is

automatically dialled for

up to 15 minutes at

increasing intervals.

During this period, no

other number can be

dialled. To end:

S

End key.

§No§

Press.

§Transfer§

Diverts the caller e.g. to the

mailbox if

Busy

is set (p. 44)

and "call waiting" (p. 13) has

been activated.

If no key is pressed the call is automatically

ended after a few seconds.

Redial previous numbers

To redial the phone number last

called:

A

Press the Call key

twice.

To redial other numbers that were

dialled previously:

A

Press the Call key once.

B

Pick out the required

phone number from the

list, then press ...

A

... to dial.

§Options§

Call lists (p. 42).
Store phone number in the

Addressbook (p. 16)/Phone-

book (p. 20).

The numbers of calls that have been re-

ceived, dialled or missed are stored for call-

back purposes (p. 42).
An incoming call will interrupt any other use

of the phone.
Functions during the call (p. 13).
Switch off ringer for the current call (but not

if „Any key “, p. 63, is active):

*

Hold down.

The call is displayed. The caller hears the

dialling tone.

Advertising