Specifications/maintenance, Declaration of conformity, Technical data – Siemens CL50 User Manual

Page 77: Care and maintenance

Advertising
background image

13.1.03

Dinghy-dz-ger.fm

76

DINGHY, INT English, A31008-H6900-A4-3-7619

Specifications/maintenance

Declaration of conformity

Siemens Information and Communi-

cation mobile hereby declares that

the phone described in this user

guide is in compliance with the es-

sential requirements and other rele-

vant provisions of European Direc-

tive 1999/5/EC (R&TTE).
The declaration of conformity (DoC)

concerned has been signed. Please

call the company hotline if you re-

quire a copy of the original.

Technical data

GSM class:

4 (2 Watt)

Frequency range: 880 - 960 MHz
GSM class:

1 (1 Watt)

Frequency range: 1, 710 - 1, 880 MHz
Weight:

73 g

Dimensions:

73 x 39 x 22 mm

Operating voltage: 3.8 Volt
Operating

temperature:

-10 °C to 55 °C

Standby time:

up to 220 h

Talk time:

up to 4.5 h

SIM card:

3.0 Volt

Care and maintenance

A lot of care has gone into designing

and manufacturing your phone;

please treat it with care. You will en-

joy using your phone for a very long

time if you follow the suggestions

below.
• Keep your phone dry and protect

it from moisture. Precipitation,

moisture and liquids contain min-

erals that will corrode electronic

circuits. If your phone does be-

come wet, you should immediate-

ly disconnect it from the power

supply, if there is one, or remove

the batteries.

• Never use your phone in dusty or

dirty conditions, and don't keep it

in such places. The phone's mov-

ing parts may be damaged.

• Never keep the phone in places

that are too hot. High tempera-

tures can shorten the life of elec-

tronic devices, damage batteries

and deform or melt certain plas-

tics.

• Never keep the phone in places

that are too cold. Moisture that

will damage electronic boards

may form inside the phone when

it warms up again (to its normal

operating temperature).

• Never drop the phone; do not ex-

pose it to impacts or shocks and

do not shake it. Rough treatment

like this may break the circuit

boards in the device.

Advertising