Charge battery, Getting started – Siemens CL50 User Manual

Page 8

Advertising
background image

13.1.03

Dinghy-ger.fm

DINGHY, Int English, A31008-H6900-A4-3-7619

7

Getting Started

Charge battery

The battery is not fully charged

when delivered, so:
• Plug in charger cable at the bot-

tom of the phone.

• Plug in the power supply unit to

the main power socket (charge for

at least two hours).

If the battery is totally discharged, no

charge icon is displayed at the beginning of

the charging process.
If this is the case, leave the charger cable

plugged in. The charge icon will appear af-

ter a maximum of 2 hours. The battery is

then automatically charged.

Functions without SIM card
The phone is switched on without

the SIM card:

§Menu§

Press soft key.

All the functions that can be used

without the SIM card are displayed.

You will find a description of the

functions in this user guide.

§SOS§

Emergency number,

SOS (p. 8).

Charging
The following is shown at the top of the dis-

play on front and on the right of the outer

display:

g

When charging is in progress.

e

End of charging.

An empty battery is fully charged after

about 2 hours. Charging is only possible in

an ambient temperature of 5 °C to 40 °C

(the charge icon flashes as a warning when

the temperature is 5 °C above/below).
The voltage specified on the power supply

unit must not be exceeded.

Standby time
A fully charged battery provides up to

220 hours of standby time or up to 270 min-

utes of talk time. The standby times/talk

times are average values and depend on

the operating conditions (see table below).
Charge level display:
Full

a

b

c

Empty

A beep sounds when the battery is nearly

empty.

Operation carried

out

Time

(min)

Decrease of

standby time

Calling

1

30 to 60 minutes

Display back

light *

1

30 minutes

Network search 1

5 to 10 minutes

* key input, games, organiser etc.

Advertising