Smeg LB30AFNF - Manual (Page 14)

31
12. Place the paper jig on the reference line of the paper jig at the rear side of the
furniture door. (See Figure 7)
Reference - Place the reference line of the paper jig at 1595mm from the floor of the furniture.
- If the furniture door is long, place the reference line of the paper jig at 1595mm plus
‘A’ from the floor of the furniture.
Before fixing with the wood screw ,
make sure that the marked point is correct.
13. Mark two holes of the paper jig at the
furniture door. (See Figure 8)
A
1595mm
(Figure 7)
Reference line
of paper jig (for
the right hinge) Reference line
of paper jig (for
the left hinge)
(Figure 8)
14. After removing the paper jig , place the
top bracket of the furniture door on the
furniture plate and then fix the top bracket
of the furniture door with the wood screws
(four spots). (See Figure 9)
Reference - When fixing because the location
of the top bracket is not correct,
use the unused hole to fix.
(Figure 9)
b
b
8
6. Procedure to install
3) Furniture door related work