Smeg LB30AFNF - Manual (Page 15)

32
15. Insert the height adjusting nuts (two spots at the bottom) into the height adjusting
screw, and then place the top bracket of the furniture door at the height adjusting
screw of the top of the refrigerator door. Use the height adjusting nut to adjust the height
of the furniture door and set the level. (See Figure 10)
16. Check the place where the hole of the depth adjusting bracket is aligned with the
hole of the refrigerator door (Figure 11), and fix the depth adjusting bracket to the
left/right (four spots) of the furniture door with the wood screw . (Figure 12)
6. Procedure to install
4) Refrigerator door related work
(Figure 10)
(Figure 11)
(Figure 12)
d
8
8
When installing the
furniture door, be careful
of being injured or
damaging the furniture
door when the furniture
door is dropped because
the hole is not aligned.
Furniture door
Refrigerator door
b
9
9 1050mm
Reference
The door hole is located at
1050mm from the door floor.