Sony DHC-FL5D - Manual (Page 13)

13 GB
Getting Started
Inserting three R6 (size AA)
batteries into the remote
Operating a Sony TV
You can use the following buttons on the
remote to operate a Sony TV.
To Press
Turn the TV on or off TV ?/1.
Switch the TV’s video input TV/VIDEO.
Change the TV channels TV CH +/–.
Adjusts the volume of the TV TV VOL +/–.
speaker(s)
Tip
When the remote no longer operates the system,
replace all the batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove all the batteries to avoid possible damage
from battery leakage.
Notice for carrying this system
Do the following to protect the DVD
mechanism.
1 Turn on the system, then press DVD.
Make sure that all discs are removed
from the unit.
2 Hold down DVD, then press ?/1 until
“LOCK” appears.
3 Release ?/1 first, then release DVD.
4
Unplug the AC power cord.
E E
e
e E e
Speaker support
Screw
Slot
Screw ( 1 )
Screw ( 2 )
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Do not place the rear speakers on top of a TV. This
may cause color distortion in the TV screen.
• Be sure to connect both left and right rear speakers.
Otherwise, the sound will not be heard.
To prevent the speakers from falling
When you place the speakers on top of the sub
woofer and the main unit, do the following.
1
Place the speaker support on the sub woofer
and the main unit. Tighten one of the screws
(1) lightly to temporarily fix the speaker
support, tighten the other screw to fix (2), then
tighten the first screw (1) firmly.
Tighten the screws while threading the top
boards of the sub woofer and the main unit.
2
Insert the speaker support in the slot of the front
speakers. Tighten two screws while threading
the rear boards of the front speakers.
Note
When carrying the system, do not lift the front
speakers only.