Sony DHC-FL5D - Manual (Page 41)

41 GB
Tuner
3
Press TUNER MEMORY while pressing
SHIFT on the remote.
A preset number appears in the display. The
stations are stored from preset number 1.
4
Press ENTER on the remote.
The station is stored.
5
Repeat steps 2 through 4 to preset
other stations.
Setting presets through
manual tuning
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press m or M repeatedly to tune in
the desired station.
3
Press TUNER MEMORY while pressing
SHIFT on the remote.
A preset number appears in the display. The
stations are stored from preset number 1.
4
Press ENTER on the remote.
The station is stored.
5
Repeat steps 2 through 4 to preset
other stations.
Preset number
TUNED
Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10
AM stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
There are two ways to store the station presets.
To
Automatically tune in
all of the stations
that can be received
in your area and then
store them manually
Manually tune in and
store the radio
frequency of your
favorite stations
Setting presets through
automatic tuning
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press and hold m or M until the
frequency indication starts to change,
then release.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 4 of
“Setting presets through manual tuning”.
Method
Automatic Tuning Preset
Manual Tuning Preset
continued
Preset number
TUNED