Sony DHC-FL5D - Manual (Page 49)

49 GB
Sound Adjustment
Enjoying movies with Cinema Studio
EX
Cinema Studio EX is ideal for enjoying the
movie software encoded with multi channel
format, such as the Dolby Digital DVD. This
mode reproduces the sound characteristics of
Sony Pictures Entertainment’s studios.
x C.STUDIO EX A (Cinema Studio EX A)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Cary Grant
Theater” cinema production studio. This is a
standard mode, great for watching most any
type of movie.
x C.STUDIO EX B (Cinema Studio EX B)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Kim Novak
Theater” cinema production studio. This mode
is ideal for watching science-fiction or action
movies with lots of sound effects.
x C.STUDIO EX C (Cinema Studio EX C)
Reproduces the sound characteristics of the
Sony Pictures Entertainment scoring stage.
This mode is ideal for watching musicals or
classic films where music is featured in the
soundtrack.
About Cinema Studio EX
Cinema Studio EX consists of the following
three elements.
• Virtual Multi Dimension
Creates 5 sets of virtual speakers surrounding
the listener from a single pair of actual rear
speakers.
• Screen Depth Matching
In a movie theater, sound seems to come from
inside the image reflected on the movie screen.
This element creates the same sensation in your
listening room by shifting the sound of the front
speakers “into” the screen.
• Cinema Studio Reverberation
Reproduces the reverberations peculiar to a
movie theater.
Cinema Studio EX is the integrated mode
which operates these elements simultaneously.
Note
The effects provided by the virtual speakers may
cause increased noise in the playback signal.
Enjoying Dolby Pro Logic II
(DHC-FL7D only) or Dolby
Pro Logic
This system can reproduce 2 channel sound in
multi channels through Dolby Pro Logic II or
Dolby Pro Logic. You can also use this
function for DVD when Dolby Surround is
selected in the audio setting screen.
1
Press 2.1CH/MULTI while pressing
SHIFT on the remote to select “MULTI”.
2
Press MOVIE on the remote to select
“NORMAL SURROUND”.
“PRO LOGIC” appears in the display.
Listening to audio without using
Dolby Pro Logic II (DHC-FL7D only) or
Dolby Pro Logic
With “NORMAL SURROUND” selected,
press 2.1CH/MULTI while pressing SHIFT on
the remote to select “2.1CH”.
Using the menu to select Dolby Pro
Logic II or Dolby Pro Logic
(DHC-FL7D only)
1 Set 2.1CH/MULTI to “MULTI”, then select
“EFFECT OFF” or “NORMAL
SURROUND”.
2 Press AMP MENU.
3 Press V or v repeatedly to select “DOLBY
PL MENU”.
4 Press ENTER.
5 Press B or b repeatedly to select the mode.
6 Press ENTER.
The selected mode appears in the display.
continued