Receiving calls, Press – Sony CM-B1200 User Manual
Page 20
20
You can receive calls as long as the out-of-service
icon (
) is not displayed. The
icon indicates
that you are outside the service area.
When you receive a call, the ringer sounds and “Incoming Call”
flashes.
Note
If you turn off the ringer volume (see page 38), you will not hear
the ringer sound. The message “–Ringer Off–” is displayed
on the standby display.
1
Press
SEND
to answer the call.
When the call is connected, the call timer appears and
displays the elapsed call time.
2
Press
END
to end the call when you are
finished.
The icon disappears and the final elapsed call time
flashes for 10 seconds.
The standby display automatically reappears.
Tips
• Using the Jog Dial™ navigator, you can adjust the earpiece volume or mute the microphone
during a call (see page 19).
• Enhanced voice privacy is indicated by the message “–P–” displayed in the upper left corner
of the LCD (see page 64). This feature is carrier-dependent.
• If Any Key Answ is turned on, you can answer the call by pressing any button except
PWR
(see page 52).
Receiving calls
Incoming
Call
My Phone
12:34P 12/25
:Saved #s
:Features
Time: 1:21
v
Time: 0:01
2
ABC
3
DEF
5
JKL
6
MNO
8
TUV
0
OPER
4
GHI
7
PQ
RS
9
WX
YZ
1
PWR
CLR
SEND
END
SEND
END
CLR
B2200/18-21final
3/2/98, 1:16 PM
20