Sony CM-B1200 - Manual (Page 32)

32
3 Turn up to select “Recall Loc#,” then
push .
The Phone Book entry stored in the selected memory
location is displayed.
If the entered location is empty, a message appears
similar to the one in the following display. After a few
seconds, the standby display reappears.
Tip
In addition, you can use the Directory menu to search the Phone Book by memory location (see
page 48).
Searching for a phone number
The phone lists all entries that contain the entered digit(s).
1
On the standby display, enter at least the
first three digits of the phone number you
want to find.
2 Push .
The Options menu appears.
3 Turn up to select “Find Number,” then
push .
The Phone Book lists and displays all entries matching
the entered digits. Depending on the Sort Book setting
(see page 60), the entries are listed either alphabetically
or by memory location.
4 Turn up to view the next entry that
contains the search string.
If a matching Phone Book entry is not found, a message
similar to the following is displayed. After a few
seconds, the standby display reappears.
Phone Book
storage
location 15
is empty.
L15
SONY
123-456-7890
:Options
L15
SONY
123-456-7890
:Options
L15
"645"
wasn't found
in any Phone
Book entries
L01
OPTIONS
Find Number
Send
Save
456
:Options
B2200/22-35final 3/2/98, 1:18 PM 32