Sony CM-B1200 - Manual (Page 66)

66
Activating phone services (OTASP) [F76]
You can use the OTASP (Over-The-Air Service Provisioning) activation feature to
self-activate your phone with a new service. Contact your service provider to see if
this service is available in your area.
1
Turn to select “Activation” from the
Network menu, then push .
The Activation menu appears.
2
Turn to select which system block to
activate the service on, then push .
The following display appears, prompting you for
confirmation. To go back one step, press
CLR
. To cancel
activation and return to the standby display, press END .
3 Press 1 to confirm.
The phone calls up a service provider.
When a service provider is contacted, the following
display appears, and you are connected to an operator.
When activation is complete, the following display
appears followed by the standby display.
If activation fails
The following display appears. Push to retry, or press END to
return to the standby display.
Time: 4:20
Activation
is complete!
:OK
Time: 0:01
Activation
<star code>
Time: 4:20
Activation
has failed
:Retry
Attempt to
activate
Block A?
1:Yes
F76
ACTIVATION
on Block A
:Choices
:To Set
F76
Searching...
Activation
<star code>
F76
v
v
B2200/50-66final 3/2/98, 1:23 PM 66