Sony CM-B1200 - Manual (Page 45)

45
Advanced
Features
5 When you are finished, push to store
the phone number and name.
A display similar to the following appears.
6 Push to store the new number in the
first available memory location.
If you want to store it in another location, turn to
select the desired location, then push .
A confirmation message appears, followed by the
status of the Phone Book.
Tip
In addition, you can use the Options menu to store Phone Book numbers (see page 22).
Erasing a phone number [F33]
You can erase stored Phone Book entries. If the selected entry is restricted, you must
enter the four-digit lock code to erase it (see page 54).
1 Turn to select “Erase” from the
Directory menu, then push .
The following display appears, prompting you for the
Phone Book entry to be erased.
2 Turn to select the entry you want to
erase, then push .
A display similar to the following appears, prompting
you to confirm that the selected Phone Book entry
should be erased. In addition, you can use the number
buttons to select the entry to be erased.
3 Push again.
The selected entry is erased. After a few seconds, the
standby display reappears.
Tips
• Also, you can use the Options menu to erase one Phone Book entry at a time (see page 26).
• Use the Security menu to erase all Phone Book entries at once (see page 56).
Save in
location 15?
:Save
:Other Loc
SONY
has been
saved in
location 15.
L15
PHONE BOOK
LOCATIONS:
21 used
78 empty
v
-erased-
L15
Erase Phone
Book
Location 15?
:Erase
L15
to find
entry to
erase then
to select.
F33
B2200/36-49final 3/2/98, 1:20 PM 45