Sanyo DMP-692 - Manual (Page 9)

Battery Precautions
Follow these precautions when using a battery in this device.
1. Warning -Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
2. Use only the size and type of battery specified.
3. Be sure to follow the correct polarity when installing the battery as indicated in the Battery
Compartment. A reversed battery may cause damage to the device.
4. If the device is not to be used for a long period of time, remove the battery to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer’s directions.)
6. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
8
Using The AC Adaptor
Connect the small female plug of the AC adaptor to the DC In Jack on the back panel.
Connect the housing of the AC adaptor to the 120V AC outlet.
NOTES:
• The housing of the AC adaptor may become warm during operation. This is normal.
• To reduce the risk of electric shock never connect or disconnect the AC adaptor while
your hands are wet.
• Please use original AC adaptor supplied with the unit, otherwise, will damage the unit.
BATTERY BACK-UP SYSTEM