SVAT Electronics CV0204DVR - Manual (Page 23)

CV0204DVR 20
5.5 BUZZER SETUP
1. ALARM ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm
when motion event has been detected (this setup is only active when the system is
under record status and schedule record is setup to “M” (Mix).
2. VIDEO LOSS ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the
alarm when video loss has been detected (this setup is only active when the system
is under record or live status).
3. HDD FULL ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the
alarm when hard disk is full (this setup is only active when the system is under
record status).
4. BUZZER TIME: Press ENTER to setup the buzzer time to continuous (CONT), and
press any button to release this setup.
SVAT ELECTRONICS
Now You Can See