SVAT Electronics CV0204DVR - Manual (Page 33)

CV0204DVR 30
SVAT ELECTRONICS
Now You Can See
4. Select the Virtual Server tab.
• Enable the Virtual server
• In the Name field type in “DVR”
• In the Private IP field enter the DVR’s IP address.
• In the Protocol field, select Both (This will enable both TCP and UDP).
• In the Private port enter the port number you need to forward. By default this DVR is set
to port 80. Use port 80 unless you have a reason to change the DVR to another port (not
recommended).
• In the Public port re-enter the port number you entered in the private port field
(e.g. 80).
• Select the Schedule to Always.
• Ensure that the Virtual Server (or forwarding that is being set-up) is set to ENABLED.
When complete, select the Apply button located at the bottom of the page to save your
changes. Port forwarding is now complete!