Using the rspf – Sharp AL-1655CS User Manual

Page 34

Advertising
background image

CONVENIENT COPY FUNCTIONS

32

Using the RSPF

1

Place the original(s) in the RSPF. (p.25)

If you place an odd number of originals for one-sided to two-sided copying,
the last page will be one-sided.

2

Press the [2-SIDED COPY] key and select
the two-sided copy mode that you wish to
use.

The mode changes as follows each time you press
the [2-SIDED COPY] key:
"1 TO 1"

→ "1 TO 2" →

→ "2 TO 2" →

→ "2 TO 1"

• "1 TO 2": Two-sided copies from one-sided originals
• "2 TO 2": Two-sided copies from two-sided originals
• "2 TO 1": One-sided copies from two-sided originals

3

Press the [ENTER] key.

If you selected "1 TO 2" in step 2, select "LONG EDGE" or "SHORT EDGE"
and press the [ENTER] key. LONG EDGE and SHORT EDGE are shown in
the illustration on page 30.

4

If you selected "2 TO 1" or "2 TO 2", press
the [

] key (

) or [

] key (

) to select

the original size and then press the
[ENTER] key.

The following original sizes can be selected:
"8.5x14",

"8.5x13", "8.5x11", "5.5x8.5", "A4", "B5",

"A5".

5

Select the number of copies and any other
copy settings, and press the [START] key (

).

The copy will be delivered to the paper output tray.

• To cancel automatic two-sided copying, press the [CLEAR ALL] key

(

) or press the [2-SIDED COPY] key, select the "1 TO 1", and then

press the [ENTER] key.

• Do not touch the reversing tray while automatic two-sided copying is

in progress.

2-SIDED COPY
2 TO 1

ORIG. SIZE ENTER
5.5x8.5

Note

AL-1655CS.book 32 ページ 2004年8月22日 日曜日 午後6時44分

Advertising