Sharp AL-1655CS - Manual (Page 49)

SET UP THE SOFTWARE
47
5
1 Insert the cable into the USB
connector on the machine.
2 Insert the other end of the cable into your computer's USB port.
Using the machine as a network printer
1 Insert the LAN cable into the LAN
connector on the machine.
Use a network cable that is shielded.
2 Turn on the machine.
3 Insert the CD-ROM into your computer's CD-ROM drive.
4 Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM icon ( ).
In Windows 95/98/Me/NT 4.0/2000, double-click "My Computer", and then
double-click the CD-ROM icon.
• Interface cables for connecting the machine to your computer are not
included with the machine. Please purchase the appropriate cable for
your computer.
• If you intend to use the machine as a scanner, it must be connected
to your computer with a USB interface cable. The scanner function
cannot be used if the machine is connected with a LAN cable.
• To install the software using a network connection in Windows 95,
Internet Explorer version 4.01 or later must be installed on your
computer. If this is not installed, double-click "My Computer" and then
double-click the CD-ROM icon. Double-click the following folders in
order; "Packages" - "Neutral" - "Sharpdesk" - "le501" - "EN", and then
double-click "ie5setup.exe".
Note
AL-1655CS.book 47 ページ ２００４年８月２２日 日曜日 午後６時４４分