Smartek ST-2000 - Manual (Page 10)

10
CAUTION
1. Turn the iron off and unplug.
2. Empty the iron immediately after using. Do not store the iron with water in
it.
3. Wait until the iron has cooled before storing it, and always set it on the
Heel Rest to protect the soleplate from scratches, corrosion or stains.
4. After letting iron cool completely, store the iron vertically in a safe place.
Please see Important Safety Instructions .
After unplugging and cooling the iron, simply wipe off with a damp cloth and if
necessary, use a mild detergent.
NEVER USE ANY HARSH CLEANERS.
Starch and other residue may be easily removed from the Soleplate with a
damp cloth.
To avoid scratching the finish never use a metallic pad to clean the Soleplate,
and never place the iron on a rough surface.
If synthetics are ironed at too high temperature not only is the fabric usually
ruined, but the iron Soleplate is often covered with the melted remains of the
synthetic fabric.
The best way to remove synthetic residue from the Soleplate is to heat the
iron and to iron over an old cotton rag.
Never Use steam iron
cleaners in the iron, since they may damage the working parts of the iron.
SPECIFICATIONS
:
Power Source 120V, 60 Hz
Power Consumption 10 A, 1200W
Net Weight 4 lb
SOLEPLATE
OUTSIDE SURFACE OF THE IRON
AFTER EACH USE