Smartek ST-2000 - Manual (Page 3)

3
READ ALL INSTRUCTIONS BEFORE USING THE IRON
1. Use the iron only for its intended purpose, for ironing fabrics on board.
2. To protect against burns or injury to persons, do not iron or steam
fabrics while being worn on the body.
3. The iron should always be turned “OFF” before plugging or unplugging
from outlet. Never yank cord to disconnect from outlet, instead, grasp
plug and pull to disconnect.
4. Do not allow cord to touch hot surface. Allow the iron to cool completely
before storing.
Retract cord into cord reel unit when storing
5. Always disconnect iron from electrical outlet when filling or emptying
water and when not in use.
6. To avoid risk of electric shock, do not operate iron with a damaged cord
or if the iron has been dropped or damaged. Do not disassemble the
iron. Incorrect reassembly can cause a risk of electric shock when the
iron is used. For repair, take it to a qualified serviceman.
7. Close supervision is necessary for this appliance being used by or near
children. Do not leave iron unattended while connected or on an ironing
board.
8. Burns can occur from touching hot metal parts, hot water, or steam. Hot
water may leak from the iron. Use caution when filling or turning the
steam iron upside down.
9. To protect against burns or injury to persons, do not direct steam
toward the body when ironing.
10. The iron must be used and rested on a stable surface. When placing
the iron on its stand, ensure that the surface on which the stand is
placed is stable.