Smartek ST-2000 - Manual (Page 8)

8
HOW TO USE AS A STEAM IRON
1. Fill the iron as described in “HOW TO FILL WITH WATER”.
2. Position the iron vertically and turn the Temperature Control Dial to the
steam position.
3. Plug the AC Cord into the electrical outlet.
4. Set the Temperature Control Dial to the steam position.
5. Preheat the iron until the indicator light goes out, usually about 1-2
minutes.
Now steam ironing can begin .
HOW TO USE THE SPRAY
Before using the spray feature, check the fabric label for ironing
instructions because some fabrics may be spotted or stained with
moisture.
The spray feature is particularly helpful for removing stubborn wrinkles and
where extra dampening is needed.
The spray may be used with steam or dry ironing.
Simply pump the Spray Mist Button when spray is desired.
HOW TO USE AS A DRY IRON
1. Position the iron vertically.
2. Plug in the iron.
3. Set the Temperature Control Dial to “MIN” position
Refer to the Fabric Ironing Chart in this manual on page # 12
4. Preheat the iron until the indicator light goes out, usually about 1-2
minutes.
Now dry ironing can begin
.