Smartek ST-2000 - Manual (Page 9)

Cord Ironing
1. Turn the cord switch to “Cord”
2. Lift the iron (with cord) from the stand
.
• NOTE: The indication light will turn on and off from time to time during the
cord ironing.
Cordless Ironing
1. Turn the Cord to switch to “Cordless”
2. Lift the iron (without the cord) from the stand.
To assure that the iron reaches the present temperature:
1. Place the iron in its suitable position on the stand for heating.
2. Do not lift the iron until the indication light turns off.
3. To reheat the iron place it back onto the stand
4. Do not use cordless ironing longer than two minutes.
Note: When using a lot of cordless ironing the soleplate temperature will go
down very quickly. The ironing result may not be so good. Thus we suggest
cord ironing when ironing thick clothes
9
CAUTION
Placing the iron on the stand
The correct way is indicated
in Fig. #1
The incorrect way is indica
ted in Fig. # 2