Smeg CSA19ID-6 - Manual (Page 14)

Instructions for the user
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it
anticlockwise to maximum flame . To adjust the flame
turn the knob between maximum ( ) and minimum ( ).
The burner goes out when the knob is returned to the
position .
THERMOSTAT KNOB (OVENS)
Selection of cooking temperature is carried out by turning
the knob clockwise to the required temperature, between
50° and 250°C. The tell-tale light comes on to indicate
that the oven is warming up. When it goes out it means
that the required temperature has been reached. Regular
flashing means that oven temperature is being constantly
maintained at the programmed level.
FUNCTION SWITCH KNOB (OVENS)
Turn the knob to select from the following functions:
MAIN OVEN AUXILIARY OVEN (MODEL CSA20)
NO FUNCTION SET NO FUNCTION SET
OVEN LIGHT OVEN LIGHT
UPPER AND LOWER
HEATING ELEMENT UPPER AND LOWER
HEATING ELEMENT
GRILL ELEMENT UPPER HEATING ELEMENT
GRILL ELEMENT + VENTILATION LOWER HEATING ELEMENT
LOWER HEATING ELEMENT +
VENTILATED HEATING ELEMENT GRILL ELEMENT
VENTILATED HEATING ELEMENT +
VENTILATION GRILL + SPIT ELEMENT
16