Smeg CSA19ID-6 - Manual (Page 29)

Instructions for the user
10.2.2 Burner caps, flame cap crowns and burners
To facilitate cleaning, caps, flame cap crowns, and burners are all
removable. To remove the flame separating crown of the fish hob, loosen
the two screws exposed after having removed the cap. Wash all parts
with warm water and non-abrasive detergent taking care to remove all
tough spots. Wait for all parts to be fully dry before remounting.
Re-install the caps on the corresponding crowns making sure that
grooves A are perfectly aligned with pins B of the burners. Re-tighten the
securing screws of the fish hob flame cap crown.
10.2.3 Ignition plugs and thermocouples
To work well, the ignition plugs and thermocouples must always be very
clean. Check them frequently and clean them with a wet rag if
necessary. Any dry residue should be removed with a toothpick or a
needle.
10.3 Cleaning of ovens (without self-cleaning panels)
To keep an oven in good condition it must be cleaned regularly. Let it
cool first. Take out all the removable parts.
Remove the side guides by raising them at the front. Free them from the
rear hole and extract them.
•
Clean the oven grill and side guides with hot water and non-abrasive
detergent. Rinse and dry.
31