Sherwood CDC-5090C - Manual (Page 16)

1 6
Find the track 5 of the disc 1.
1
Example) When the track 3, 5 and 7 of the disc 1
are programmed and you want to store
the track 7 of the disc 3 instead of the
track 5 of the disc 1.
Select the disc 3.
2
Rectifying any wrong programmed
selection
Repeat the above steps 2, 3 and 4 until the desired program is completed.
5
Start the programmed play.
6
During the programmed play, when you want normal
play without clearing your programmed selections,
select the desired disc with the DISC SELECTOR or
DISC SKIP button or the desired track on the current
disc with the NUMERIC buttons, then normal play
will start from that disc or that track.
To return to the program mode(meaning “PROG”
lights up in the stop mode), press the
PROGRAM/REVIEW button in the stop mode.
ENGLISH
Each time the PROGRAM/REVIEW button is
pressed in the program mode (meaning “PROG”
lights up in the sop mode), the programmed
selections will appear in the programmed sequence.
Checking the programmed selections