Sherwood CDC-5090C - Manual (Page 19)

1 9
ENGLISH
If the PLAY button is pressed after editing the
tracks, play starts from the first track of the side A
for recording.
If all tracks of the side A have been played, press the
PLAY button to start play from the first track of the
side B for recording.
When this unit is connected to Sherwood compatible
cassette deck controlled remotely by DIGI-LINK III
system, if using the CD synchro record function on
the cassette deck, recording a CD is easier. (Refer to
the operating instructions of the cassette deck).
In the stop mode, select the manual edit
mode.
1
Select the tape length as you do in
“Making auto edit” procedure.
2
Press the PROGRAM/REVIEW button to
manually edit the tracks to be recorded.
3
Edit the tracks for the side A repeating
steps 3 and 4 in “PLAYING TRACKS IN
ANY SEQUENCE (PROGRAMMED
PLAY)” procedure on page 15.
4
Press the EDIT button to start editing for
the side B.
5
Do the above step 4 to edit the tracks for
the side B.
6
Notes
During manual edit, if the "-" indicator in the time
display disappears and “
” flickers, it means that
the total time of the edited tracks exceeds the tape
length. So you should edit again.
When a track with a number greater than 30 is
edited, the time display may show "- -- : --".
Making manual edit