Sherwood CDC-5090C - Manual (Page 5)

5
ENGLISH
Rear Panel Connections
• Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords.
• Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making
connections with the supplied cords.
• Refer to the connecting diagram in the operating instructions of AMPLIFIER/RECEIVER.
OUTPUT JACKS
Connect these jacks to the CD(or AUX) input jacks of your amplifier or receiver.
DIGI LINK JACKS
Connect this jack to the DIGI LINK jack of Sherwood amplifier or receiver bearing the DIGI LINK III or II
mark to control this unit remotely by DIGI LINK system.
AC INPUT CORD
Plug this cord into a wall AC outlet or the switched AC outlet of amplifier or receiver.
OPTICAL DIGITAL OUTPUT
• Connect this jack to the OPTICAL DIGITAL INPUT jack of amplifier or receiver to enjoy live digital sound.
• You can record digital sound by connecting the OPTICAL DIGITAL INPUT jack of MD recorder to this jack.
• All of the commercially-available optical fiber cords cannot be used for audio equipment.
If there is an optical fiber cord which cannot be connected to your audio equipments, consult your dealer or
nearest service organization.