Sherwood CDC-5090C - Manual (Page 20)

2 0
ENGLISH
SELECTING A BRIGHTNESS OF THE DISPLAY (ONLY
In the edit mode, check as you do the programmed tracks.
(refer to “Checking the programmed selections” on page 16)
In the edit mode, press the STOP/CLEAR button for more than 4 seconds or open the tray.
In the manual edit mode only, you can clear or rectify the edited tracks as you do in “Rectifying any wrong
programmed selection” or “Cleaning the programmed selections” on page 16 and 17.
Checking the edited tracks
Each time this button is pressed, the brightness of the
display changes as follows;
ON DIM OFF
In the display OFF mode, pressing any button will
restore the display ON mode.
Clearing all edited tracks