Sony PCS-1P - Manual (Page 53)

2-23
PCS-1/PCS-1P
Operation log using commercial PC (2)
When PCS-1/1P is connected to LAN, a log can be extracted from PCS-1/1P using telnet with PC
connected to LAN.
Even when PCS-1/1P is not connected to LAN, a log can be extracted from PCS-1/1P using telnet by
connecting the 100BASE-TX/10BASE-T terminal on the rear panel of PCS-1/1P and the LAN terminal
of PC directly using a LAN cross cable.
First, connect PCS-1/1P and PC to LAN, or connect them directly using a cross cable and set LAN of IP.
After that, transmit ping from PC to PCS-1/1P and confirm that a reply is returned from PCS-1/1P.
(1) Click “Command prompt” from “Start menu”.