E 31, Performing initial setup operations, Inserting batteries into the remote – Sony HT DDW1600 User Manual

Page 31: Press ? / 1 to turn off the receiver, Hold down ? / 1 for 5 seconds

Advertising
background image

31

GB

Getting Star

ted

Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.

1

Press ?/1 to turn off the
receiver.

2

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears on the
display alternately.

3

Press MEMORY/ENTER.

After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,

SUR, TUNER, AUDIO, VIDEO and
SYSTEM menus.

• The sound field memorized for each

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset

stations.

• MASTER VOLUME is set to “VOL

MIN”.

• Input is set to “DVD”.

Insert two R6 (size-AA) batteries in the

RM-AAU013 (models of area code MX, E51,
AR only) or RM-AAU015 (models of area
code SP, AU, TH only) remote commander.
Observe the correct polarity when installing
batteries.

Notes

• Do not leave the remote in an extremely hot or

humid place.

• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of

batteries.

• Do not expose the remote sensor to direct sunlight

or lighting apparatuses. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an

extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.

• When you replace the batteries, the remote buttons

may be reset to their factory settings. If this
happens, reassign the buttons again (page 69).

Tip

Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.

Performing initial setup
operations

?/1

AUTO CAL MIC

AUTO CAL

TUNING MODE

TUNING

+

PHONES

MEMORY/

ENTER

SLEEP

DIMMER

MULTI CHANNEL DECODING

SUR BACK

DECODING

2CH

A.F.D.

MOVIE

MUSIC

MODE

SPEED

X-ROUND

DISPLAY

INPUT MODE

INPUT SELECTOR

MASTER VOLUME

VIDEO 3 IN/PORTABLE AV IN

VIDEO

L AUDIO R

1,2

3

Inserting batteries into the
remote

Advertising